Gestra MK 35/31 3/8

Description
Thermostatic steam trap with membrane regulator. Corrosion-resistant thermostatic capsule unaffected by waterhammer. Integral strainer. Asbestos-free cover gasket
(graphite/CrNi). Installation in any position.
The traps with standard capsule “N” discharge the condensate with virtually no banking-up,
the traps with special capsule “U” with an undercooling of approx. 30 K (degC).
MK 35/31 with tandem seat
In particular for low condensate flowrates. Optionally either with standard capsule
“5 N 1” or undercooling capsule “5 U 1”.
MK 35/32 with single seat
For larger condensate flowrates. Optionally either with standard capsule “5 N 2” or undercooling capsule “5 U 2”.Capacity Charts
The charts show the maximum capacities for hot and cold
condensate.
Curve 1
Curve 1 indicates the max. capacity of hot condensate
that the traps with “N” capsule can discharge at a condensate temperature of approx. 10 K (degC) below saturation
temperature (virtually no banking-up), and the traps
with “U” (undercooling) capsule when the condensate
is approx. 30 K (degC) below the saturated steam
temperature.
Curve 2
Curve 2 shows the max. capacity of cold condensate that
the traps can discharge (condensate temperature 20 °C).