Dynisco ATC 770-0-3-3 Process Controller

·        
Unique self- tuning algorithm·        
Three alarms·        
Dual 5 digit displays (red/green) and bargraph·        
Automatic ramp to setpoint·        
24 Vdc transmitter power supply·        
MODbus communications·        
Displays setpoint; deviation from setpoint;·        
Output %; motor RPM; peak (high or low)·        
UL and cUL approved·        
CE appoved Main Power Supply: From 100 to 240 VAC (-15% to 10%),
50/60 Hz switching. Option: 24 V AC/DC (-10% to 10%) Power Consumption: Max 22 VA at 50 Hz; Max 27 VA at 60 Hz
Insulation Resistance: 100 Mohm @500 VDC Dielectric Strength:1500 V rms for 1 min, 1800 V for 1
sec (according to EN6 1010-1) Ambient Temperature: From 0 to 50°C Storage Temperature: From -20 to 70°C Humidity: Max 85% RH non-condensing Watchdog: Hw/Sw is provided for automatic restart Protection: Two internal dip switches for factory
calibration and security codes protection Agency Approvals: UL File # 193253, cUL pending

Self-Certification: CE