Mô tả
Amplifier – Bộ khuếch đại tín hiệu ASA-RT ADS-R2
Amplifier – Bộ khuếch đại tín hiệu ASA-RT ADS-R2 gồm ADS-R2, ADS-R2/P, ADS-R2/C, ADS-R2/PN là bộ khuếch đại đo kỹ thuật số dành cho hai cầu đo biến dạng riêng biệt, mỗi cầu bao gồm hai mạch thu 24 bit với mức tăng có thể lập trình và 3 đầu ra analog hướng tới thiết bị giám sát.
Liên hệ thông tin Đại lý ASA-RT Vietnam
Amplifier ADS-R2 is a digital measuring amplifier for two separate strain gauges bridges, each including two 24 bit acquisition circuits with programmable gain and 3 analog outputs towards a supervision unit.
In the standard mode, the measuring amplifier allows the analog signal zeroing (calibration), and the output gain increasing / decreasing, by a three-buttons interface; the output tension is continuously visualised on the display, allowing, therefore, the adjustment without external instruments (tester or screw-driver).
In the advanced mode, using the keyboard and the display, it is possible to program all operational parameters of the units : zero, gain (full scale in engineering unit), pass-band of the filter on the signal, threshold values for alarms, etc.; in normal operation, the display visualises the tension measurement, calculated according to the current parameters. On the ADS-R2 is also available or a Profinet I/O interface
ADS-R2P ADS-R2/P: with interface ProfiBus (DPv1)
ADS-R2/C: with interface CANopen (DS404)
ADS-R2/PN: with interface Profinet I/O